You can assign any IP to your PC/Laptop ranging from 192.168.1.2 to 192.168.254. But please do remember the fact that you can not assign same IP to two device. If i put it in simple, assign one unique IP to each connected PC/Laptop. Otherwise IP Conflict will occur.
1.Type 192.168.1.1 on your PC browser( Google chrome, Mozilla Firefox, internet explorer etc)
2.Upon typing you will be asked for a username and password. Type
Username: admin
Password: admin
Press Enter now.
3. Now you will see a device status page.
4.Now click on Interface setup and then on internet.
5.Here you need to select ISP: PPPoA/PPPoE
VPI=0, VCI= 35
And fill service name: BSNL
Username: this will be your broadband user id. BSNL(internet service provider) will provide this at the time of connection. Contact BSNL if you don’t know username.
Password: password
Once you get you get your username, put it on the appropriate field. After putting username and password click on SAVE button.
6.Wifi Setup
To setup your wifi, click on wireless.
Check Access Point Activated.
Wireless Mode: 802.11 b+g+n
SSID: Put any name here. This will be your wifi access point name.
Authentication type: WPA-PSK/WPA 2 PSK
Encryption: TKIP/AES
Pre shared key: This will be your wifi password.
Wireless Mac address Filter: Deactivated.
Now click on SAVE button and close the browser.
You have now successfully configured your modem. You will notice that ‘Internet’ LED will now turn green from red and will start blinking.
If you like this post and if it helped you somehow then please share it on social media. This will help the blog to grow. And if you have any questions regarding configuration please put your comment below.
4. Here Hit on “Advanced Set Up” and then “EDIT” over Service PPPoE.
5. No need to change “ATM PVC Configuration” hit “Next”.
6. Change “Connection Type” to “PPP over Ethernet (PPPoE)” then hit “Next”.
7. Enter “PPP Username and Password” and Enter Service Name as your Wish. Don’t change any other setting. Click on “Next”.
8. Don’t change any settings at “Network Address Translation Settings”. Click “Next”, then Click “SAVE”.
Enabling WiFi Security
1. Go to Wireless Tab at Left Side.
2. Then Security set Network Authentication to OPEN, Enable WEP Encryption, Current Network Key to “1” and enter Network Key 1 as ABCDE (Which acts as password while connecting to Wi-Fi).
3. Save your Settings and Reboot you Router or Modem.
If you are facing any problem while configuring BSNL Broadband Modem to enable WiFi then watch the video for better understanding.
